IKEA RENODLAD Manual page 14

ENGLISH
– = the rinse aid empty
notification is deactivated.
– = the rinse aid empty
notification is activated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
The rinse aid level
It is possible to set the released quantity of
rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid dispenser
and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press .
• The indicators
are off.
• The indicator
flash.
• The display shows the current setting:
e.g. = level 4.
– The levels of rinse aid range from
0A to 6A where level 0A means
rinse aid is not used.
2. Press repeatedly to change the
setting.
3. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is complete. This
acoustic signal is activated by default and
you can deactivate it.
In addition, an acoustic signal sounds
before the AutoOpen opens the door. This
, , and
continues to
acoustic signal stops only if AutoOpen is
deactivated.
How to deactivate the acoustic signal for
the end of programme
Make sure the appliance is in user mode.
1. Press
• The indicators
are off.
• The indicator
• The display shows the current setting.
– = the acoustic signal is
deactivated.
– = the acoustic signal is
activated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption. During the drying
phase, the door opens automatically and
remains ajar.
AutoOpen is automatically activated with
all programmes excluding
applicable).
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
14
, and
still flashes.
(if