Polaris RZR Trail S 2022 Owner's Manual page 38

FEATURES AND CONTROLS
HEADLIGHT SWITCH
Use the headlight switch to turn the lights on and off and to change the lights
from high beam to low beam. The ignition switch must be in the ON position to
operate the headlights.
Press the top of the rocker switch toward the dash to place the headlights on
q
high beam . Move the rocker switch to the center position to place the
w
headlights on low beam . Press the bottom of the rocker switch to turn off the
headlights.
If the headlight switch is ON when the ignition switch is turned off, the lights will
remain on for approximately 30 seconds.
ELECTRONIC POWER STEERING (EPS)
Electronic power steering engages when the ignition key is turned to the ON
position. EPS remains engaged whether the vehicle is moving or idle.
The EPS warning indicator briefly illuminates when the key is turned to the ON
position. See the Indicator Lamps section for details.
If the engine is off but the ignition switch remains in the ON position, the EPS will
shut down after 5 minutes of engine inactivity. The EPS warning indicator will
illuminate to indicate the EPS has shut down.
If the EPS warning indicator remains on after turning the ignition switch to OFF
and then starting the engine, the EPS system is inoperative. See your POLARIS
dealer, or another qualified person, as soon as possible for repair. Continued
operation could result in permanent damage to the EPS unit and increased
steering effort.
36