Polaris RZR Trail S 2022 Owner's Manual page 37

IGNITION SWITCH
The ignition switch is a four-position, key-operated switch. Use the ignition
switch to start the engine. See page 77 for starting procedures.
POSITION
OFF
ACCESSORY
ON
START
The key can be removed from the switch when it is in the OFF position.
ALL WHEEL DRIVE (AWD) SWITCH
Use the All Wheel Drive (AWD) rocker switch to
change the vehicle's driveline mode. There are two
available settings:
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD)
Press the top of the rocker switch to engage All Wheel
Drive. Press the bottom of the switch to operate in Two
Wheel Drive. See the All Wheel Drive (AWD) System
section for operating instructions.
FEATURES AND CONTROLS
The engine is off. Electrical circuits are off, except
accessory 12V.
The engine is off. Powers the gauge and terminal
block. Check engine and power steering warning
indicators will appear on the gauge in this mode but will
turn off when the vehicle is started if no issues are
present.
Electrical circuits are on. Electrical equipment can be
used.
Turn the key to the START position to engage the
electric starter. The key returns to the ON position
when released.
FUNCTION
35