Polaris RZR Trail S 2022 Owner's Manual page 12

INTRODUCTION
EUROPEAN VIBRATION AND NOISE
The driver-perceived noise and hand/arm and whole body vibration levels of this
machinery is measured per EN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as
indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many
factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or physique
• Ability of the worker to reproduce typical work during measurements
• Environmental factors such as ambient noise or temperature
RADIO COMPLIANCE STATEMENTS
Some vehicle models contain radio equipment as detailed in this section.
USA RADIO COMPLIANCE
This vehicle contains the following radio equipment or components that contain
radio equipment:
COMPONENT
9200 Series Display
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
CANADA RADIO COMPLIANCE
This vehicle contains the following radio equipment or components that contain
radio equipment:
10
NOTE
COMPONENT ID
RC-7
CAUTION
MANUFACTURER
Polaris Industries Inc.