Always use the lifting handholds to lift the Surface Hub. Never try to use the bottom edge or the sides of the Surface Hub to support any part of its weight,
since this could damage the Surface Hub.
WARNING: Ergonomic Lifting
To reduce the potential for lifting-related injuries, follow good ergonomic lifting guidelines.
Ergonomic lifting guidance:
•
Plan ahead
•
Determine if you can lift the unit. Is it too heavy or too awkward?
•
Decide if you need lifting aid.
•
Check your environment for obstructions and slippery surfaces.
•
Make sure the lifting team agrees on the plan.
•
Lift with your legs, not your back
•
Bend at your knees, keeping the back straight.
•
Keep the unit close to your body.
•
Center your body over the unit. Keep the feet about shoulder width apart.
•
Lift straight up smoothly.
•
Keep your torso straight; do not twist while lifting or after the load is lifted.
•
Set the unit onto the system slowly and smoothly with a straight back; do not let go until the unit is set in place.
Need help?
Do you have a question about the Surface Hub and is the answer not in the manual?