Chrono Mode; Timer Mode; Alarm Mode - Diesel DZ1067 User Manual

Digital MD-FL298X, FL388, QFL226DB
(B)
(A)
Alarm on
Hourly chime on
Automatic EL
Key tone
Chronograph
A
MODE
SET/EL
SET (hold for
REAL TIME
2 seconds)
TIME SETTING EXIT
CHRONOGRAPH MEMORY RECALL
MEMORY RECALL NEXT LAP
SET (hold for
TIMER
2 seconds)
TIMER SETTING EXIT
SET (hold for
ALARM TIME
2 seconds)
ALARM SETTING EXIT
OVERVIEW
Features include DUAL TIME/DATE, CHRONO, TIMER, ALARM, and LIGHT UP EL.
LIGHT-UP EL
Press (A) to activate light-up function for 3 seconds.
TIME OF DAY MODE
- Press (C) to toggle between Time 1 and Time 2.
- Hold (C) for two seconds to set Time 1 or 2 as default.
- Press (D) to turn on/off key tone.
Time 1
- To set Time, press (A) until hour flashes. Press (B) to select the setting item. Use (C) and (D) buttons to adjust the values up or down. Press (A) to exit set mode.
Time 2
- To set Time, press (A) until hour flashes. Press (B) to select the setting item. Use (C) and (D) buttons to adjust the values up or down. Press (A) to exit set mode
- The range difference between Time 1 and Time 2 is 23 hours.

CHRONO MODE

- Press (C) to start and stop chronograph.
- Press (D) to Split/Reset the chronograph.
- Press (A) to recall the memory if Chronograph is stopped.
- Press (A) again to view the next lap.
- Press (C) or (D) to exit Recall mode and go back to Chronograph mode.
- There are a total of 10 lap memories.

TIMER MODE

- There are 3 different modes of timer: Count Down-Stop, Count Down-Repeat, Count Down-and Up.
- Press (C) to start/stop the timer counting.
- Press (D) to reset the counter to the preset value if timer is stopped.
- Press and hold (A) for 2 seconds to enter Timer Setting Mode.
Timer Setting Mode
- Press (B) to cycle around the setting item: timer-type, hour, minute, second and to back timer-type again.
- Press (C) and (D) to increase/decrease the setting value.
- Press (A) to exit the setting mode.
Timer Alarm
- Timer alarm will beep 2 times a second for 30 seconds.

ALARM MODE

- Press (C) to select the alarm.
- Press (D) to enable/disable the alarm.
- Press (B) to change to Time mode again.
Alarm Setting Mode
- Press and hold (A) for 2 seconds to enter the alarm settings mode.
- Press (C) and (D) to increase or decrease the settings value.
- Press (A) to exit the settings mode.
(C)
(D)
Count stop
Count repeat
Count up
B C
MODE START/STOP
TO CHRONOGRAPH TOGGLE TIME1/TIME2
NEXT ADVANCE
TO TIMER START/STOP
TO TIMER TO CHRONOGRAPH
TO ALARM START/STOP
NEXT ADVANCE
TO REAL TIME NEXT ALARM
NEXT ADVANCE
D
LAP/RESET
KEY TONE ON/OFF
DECREMENT
LAP/RESET
TO CHRONOGRAPH
RESET
DECREMENT
ALARM ON/OFF
DECREMENT
Digital FL145GR3
(A) (C)
(B) (D)