• When the watch is underwater or wet, never use the pushers/bezels, or set the time. Watch cases and metal bracelets should be rinsed thoroughly in fresh water after being in salt water. • No hot tub/sauna. Please do not take your DIESEL watch into the hot tub/sauna. The combination of extreme heat and water may cause your watch to lose some of its water-resistance.
2. Turn counter-clockwise to advance the time and continue until the day/date changes to the present day. 3. Set the correct time. 4. Push crown back to position 1. Day/Date Watch IS02, 507.2-3, 517.2, 2105, 2305, 2405 DATE SETTING 1. Pull the crown out to position 2.
Two Eye Multifunction 6P25, 6P75 DATE SETTING 1. Pull crown out to position 2. 2. Turn counter-clockwise to select date. DAY AND TIME SETTING 1. To set time, pull crown out to position 3. 2. Turn clockwise to set hour and minute hands. The hand showing days of the week will also move with the hour and minute hands.
2. Press A to reset the second hand to “0.” 3. Press B to reset the chronograph minute and hour hands. 4. Reset the watch to the current time and return crown to position 1. Chronograph with Date OS20, FS00, FS20...
2. Push (B) to reset the chronograph. 3. When the measured time is over 30 seconds, the 1/20-second hand stops; however, the watch continues measuring the elapsed time. The exact time elapsed is indicated when A is pressed to stop the chronograph, and the 1/20-second hand moves to the actual time.
Chronograph ISA 8161/202 (1 crown/2 pushers) SETTING THE TIME 1. Pull crown out to position 3. 2. Set time by turning the crown. 3. Push the crown back to position 1. SETTING THE DATE 1. Pull crown out to position 2. 2.
Page 8
Chronograph Stopwatch VD54 (with date - VD53) (1 crown/2 pushers) TIME AND DATE SETTING 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4.
Digital FL137AX / FL137EA NORMAL TIME DISPLAY 1. Press A to change display. Display sequence is time, calendar, seconds. 2. Press B to toggle 12/24-hour format. TIME AND DATE SETTING 1. Press and hold B for 2 seconds to enter setting mode; year will begin flashing. 2.
Digital FL291 OVERVIEW Features include TIME/DATE, CHRONO, TIMER, ALARM, and LIGHT-UP EL. LIGHT-UP EL Press (A) to activate light-up function for 3 seconds. TIME OF DAY MODE - To set Time, press (B) until hour flashes. Use (C) and (D) buttons to select hour. Press (B) to advance. Press and hold (B) to complete set mode.
Digital FDT003 / BD3000 Alarm Version FDT003 / BD3000 OVERVIEW This instruction book is set-up to mirror the logic of the digital module. The features DUAL TIME, ALARM, CHRONOGRAPH and TIMER are described in the order they appear as in the module.
Page 12
CHIME When Chime is “on,” your watch will chime once on the hour every hour: A chime will also accompany mode changes, with a higher pitched chime signaling the TIME mode. 1. To set Chime “on or off,” press (B) till Options is activated. Press either (D) or (E) till “Alrms” is highlighted, press (A) to select.
Page 13
Digital FL075AB DISPLAY MODES The digital portion of the module has (3) three display views which are selected by pressing (A). 1. While in TIME view, whether in 12 or 24 hour display is irrelevant, press (A) once and the DATE view will appear. 2.
Page 14
Digital QAA-006, QAA-033 NORMAL TIME DISPLAY 1. Press A for EL. 2. Press B to change mode. Mode sequence is time, time zone 2, alarm, timer. NOTE: In any setting mode, if no pusher is operated for 10 seconds, all changes will be saved and the setting will automatically return to display mode.
Digital MD-FL298X, FL388, QFL226DB Alarm on Hourly chime on Automatic EL Key tone Chronograph MODE SET/EL MODE SET (hold for REAL TIME TO CHRONOGRAPH 2 seconds) TIME SETTING EXIT CHRONOGRAPH MEMORY RECALL TO TIMER MEMORY RECALL NEXT LAP TO TIMER SET (hold for TIMER TO ALARM...
Page 16
4. Setting sequence is month, date, hour, minute. 5. Press B to set. 6. Press A to activate watch. Watch is activated when colon is flashing. NOTE: To change from 12 to 24-hour format, when setting hour, scroll through all digits. 12-hour format is...
LED Digital MLG-035 NORMAL TIME DISPLAY 1. Press A to display time for 8 seconds. 2. Press A again (while display is on) to change mode. Mode sequence is time, date. NOTE: Animation will be displayed before time or date for 2 seconds. NOTE: If no pusher is operated for 8 seconds, settings will be saved and the display will return to normal time display.
Digital BJ2718, BJ2679, BJ2957 NORMAL TIME DISPLAY 1. Press A to change mode. Mode sequence is normal time, chronograph, alarm, and time setting. 2. Press B for EL. 3. Press C to display date. 4. Press D to display alarm. 5.
Need help?
Do you have a question about the DZ1067 and is the answer not in the manual?
Questions and answers