Time/Date Setting - Diesel DZ1067 User Manual

LED Digital MLG-035
NORMAL TIME DISPLAY
1. Press A to display time for 8 seconds.
2. Press A again (while display is on) to change mode. Mode sequence is time, date.
NOTE: Animation will be displayed before time or date for 2 seconds.
NOTE: If no pusher is operated for 8 seconds, settings will be saved and the display will return to normal time
display.
TIME SETTING
1. Press A to display time.
2. Press and hold B, 12/24 hour format will begin flashing.
3. Press A to select 12/24 hour format.
NOTE: In 12-hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.
time.
4. Press B to set and advance to hour.
5. Press A to advance digit; press and hold A for fast advance.
6. Press B to set and advance to next setting value.
7. Setting sequence is: 12/24 hour format, hour, minutes.
8. Press B to save and exit setting mode.
DATE SETTING
1. Press A to select date mode.
2. Press and hold B, date will begin flashing.
3. Press A to advance digit; press and hold A for fast advance.
4. Press B to set and advance to month.
5. Press A to advance digit; press and hold A for fast advance.
6. Press B to save and exit setting mode.
Curved LED Digital MLL-045
NORMAL TIME DISPLAY
1. Press B for time display and animation.
2. Press B again to toggle time/date mode.
3. When time or date is displayed, press and hold B for 3 seconds to toggle horizontal/vertical display.
TIME AND DATE SETTING
1. From time display, press and hold A; 12/24 hour format will begin flashing.
2. Press B to select 12/24 hour format.
NOTE: In 12 hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.
time.
3. Press A to set and advance to hour.
4. Press B to advance digit.
5. Press A to set and advance to next setting value.
6. Setting sequence is: 12/24 hour format, hour, minutes, date, month.
7. Press A to save and exit setting mode.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to normal time
display.
PERSONAL MESSAGE SETTING
1. Press B to display time, press B again to display date, press and hold A; first letter of message will begin flashing.
2. Press B to select character.
3. Press A to set and advance to the next character.
4. Repeat steps until desired message. Please note there are only ten spaces available.
OLED MODULE
The display is normally off. To activate display, press A for date display with scrolling time (Figure 1), or press B for time/date
display with animation (Figure 2).
NOTE: Animation is randomly selected from 4 designs. Press B to change animation.

TIME/DATE SETTING

1. When the display is activated, press and hold A for 2 seconds to enter setting mode. Hour will begin flashing.
2. Press B to advance digit. Press and hold B for fast advance.
3. Press A to set and advance to next setting value.
4. Setting sequence is hour, minute, month, date, year, 12/24 hour format.
5. After the minute has been set, the seconds will reset to zero.
6. After 12/24 hour format has been selected, settings will be saved and the display will automatically return to time display.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to time display.
(A)
(B)
(A)
(B)
(A)
Figure 1
(B)
(A)
Figure 2
(B)