Technical Specifications - Eicon Networks Eiconcard C90 Installation Manual

Technical Specifications

Technical Data
• PCI bus compatible (32-bit slot)
Eiconcard
Eiconcard C90
Eiconcard C91
Hardware Installation
• Automatic configuration of interrupt request level setting and I/O address
• 32-bit I/O access
External Interface
Eiconcard
Eiconcard C90
Eiconcard C91
Performance
• 64 Kbps full duplex (HSI port)
• 128 kbps (ISDN BRI port (over the "D" channel or the "B" channels))
Power Requirements
• 1.25 A at +5 Volts
• 50 mA at +12 Volts
• 50 mA at -12 Volts
Environmental Requirements
• Operating temperature: 0°C to 50°C
• Operating humidity: 0 to 90% (non-condensing)
• Barometric operating pressure: 86 to 106 kPascals
• Maximum tolerance in power supply variation: +5% to -5%
HSI Ports
• DB-25 female connector, supporting V.24 interface (EIA RS-232-C)
• NRZ, NRZI, and FM data encoding
• Internal or external clocking (DTE or DCE) or split (transmit internal,
receive external)
Power Consumption
Warning: Check that power supply will not be overloaded. Maximum
power consumption of the board is stated above. The user should
check that the total power drawn by the host computer, the
Eiconcard C9x, and any other peripherals, does not exceed the
capability of the host power supply unit.
16
CPU/Memory/Flash
15.36 MHz Motorola 68302
512 KB RAM / 512 KB Flash
15.36 MHz Motorola 68302
512 KB RAM / 512 KB Flash
External Interface
One DB-25 female port.
One DB-25 female port and one RJ-45 port.
Technical Specifications
# of HSI Ports #of ISDN BRI Ports
1
1
N/A
1