Making An Isdn Connection - Eicon Networks Eiconcard C90 Installation Manual

Making an ISDN Connection

Only the Eiconcard C91 supports ISDN connections.
Note
After you have installed your Eiconcard C91, connect your ISDN
line.
In Europe and most countries worldwide
In Europe as well as most countries outside of North America and
Japan, your Eiconcard C91 adapter can be connected directly to
your ISDN line using the included cable.
ISDN wall jack
1.
Eiconcard C91
3.
2.
Figure 3. Connecting the ISDN cable.
1 Take the cable included with the Eiconcard C91.
2 Plug one end into the Eiconcard C91.
3 Plug the other end into the ISDN wall jack.
In North America and Others
In North America and some other countries (check with your ISDN
provider), you need an NT1 (network terminating device) to connect
your ISDN line. However, depending on your Eiconcard C91
interface, the NT1 might be integrated into the adapter. Follow the
instructions for your adapter (with U-interface or S/T-interface).
North American and Australian Eiconcard C91 S/T users may
Note
need to adjust the Eiconcard C91 termination. Refer to the section
"Termination" on page 11, for more information.
8 Making an ISDN Connection