Permobil M3 Corpus User Manual page 32

4.2.3 Anterior tilt
The anterior tilt has programmable positions to meet individual needs.
Typical tilt positions are 5°, 10°, and 20°.
• 10° makes it easier to reach objects, for instance on a table.
• 20° extends your reach even further.
When you tilt the seat forward or rearward, it will stop when it reaches a
preprogrammed position or a neutral, not tilted, position. If you want to
continue the movement forward or rearward, press the button again or repeat
the joystick maneuver. The tilt angle can vary depending on how the anterior
tilt is programmed and if any positioning limitations apply.
WARNING! Use positioning aids at all times
4.2.4 Backrest tilt
The backrest tilt tilts the backrest rearward and back up again. When the
backrest is tilted, the maximum speed of the wheelchair can be reduced
automatically or the ability to drive the wheelchair can be restricted
completely. The reduced maximum speed can be indicated with a turtle on
the display of the control panel and by a yellow light on the switch box. The
drive restriction can be indicated with a red light on the switch box or by a
flashing turtle on the display of the control panel.
32 - Wheelchair usage