Software Operation - Ametek 5000 Series Quick Start Manual And Safety Instructions

AMETEK CTS
5.3.

Software Operation

Once the software is installed and connected to the system, configured the remote interface, define and set the
voltage source and the corresponding arb-channel, select a pulse and its parameters and start the test.
1) Select communication interface
3) Set voltage source / Arb-channel
6) Start the test
Access to standard library with license key
2) Define voltage source Database
4) Select a pulse from the list
5) Set pulse parameter as required
V 1.00
Automotive Immunity Test Generators
25 / 27