Operation; Test Setup; Get Started - Ametek 5000 Series Quick Start Manual And Safety Instructions

AMETEK CTS
5.

Operation

5.1.

Test Setup

See below a test setup sample using 2 PA units connected to the NSG 5500.
5.2.

Get started

Establish all required cablings between NSG 5500 and PA 5840 (see sample setup above)
•
• Power up NSG 5500 first
Thereafter power up PA 5840 / PA 5740
•
• Get connected to the software / PC using either USB or GPIB connection
Automotive Immunity Test Generators
V 1.00 24 / 27