Advertisement
Quick Links
Q U I C K S T A R T
1
W A R N IN G
AUTOMATIC GATES CAN CAUSE SERIOUS
INJURY OR DEATH!
ALWAYS CHECK THAT THE GATE PATH IS
CLEAR BEFORE OPERATING!
REVERSING OR OTHER SAFETY DEVICES
SHOULD ALWAYS BE USED!
G U I D E
Unpack box and make sure you have all items shown here.
(Screwdriver not shown.)
12-V AC/DC Adapter
Ascent Unit
r
This Ascent unit WILL NOT WORK until the
activation process is COMPLETE!
Follow the included Activation Guide to get
If you need help or have any questions, please
contact Summit Control at (972) 474-6422.
Key
(PS-12DC2)
Carriage Bolt
Hex Nut
( 4x )
( 4x )
IM P OR T A N T
this unit activated.
S TO P
This is a cellular accessory for a gate or door.
An uninterrupted cellular connection
CANNOT BE GUARANTEED!
An emergency egress or primary entry
mechanism SHOULD ALWAYS BE USED!
(transmitter, fire box, mechanical release)
Consult with your dealer, distributor, and/or
system designer for more information.
Unlock and open front door of unit for
2
mounting, wiring, and setup.
r
Continued on next page...
1 of 6
16-M7
Model
Advertisement
Related Manuals for Security Brands Ascent M7
Summary of Contents for Security Brands Ascent M7
- Page 1 1 of 6 Q U I C K S T A R T G U I D E 16-M7 Model S TO P Unpack box and make sure you have all items shown here. (Screwdriver not shown.) This is a cellular accessory for a gate or door. An uninterrupted cellular connection CANNOT BE GUARANTEED! An emergency egress or primary entry...
- Page 2 Seal all openings created in the enclosure. Failure to follow these instructions can Inside of front door shown. damage the unit! Wiring/cabling not shown for clarity. © 2020 Security Brands, Inc. All rights reserved. QSG-16M7-EN Rev. B (12/2020)
-
Page 3: Connect Wires
3 of 6 Q U I C K S T A R T G U I D E 16-M7 Model Connect wires C A UT I O N Additional wiring diagrams can be found on Pages 4–6. Feed wires through back of unit, If the included 12-V AC/DC adapter will not be used, please go to Page 5 and follow the and connect as shown using... -
Page 4: Status Check
Open Limit Switch INS TA LLA TION COM PLET E! Now follow the Activation Guide to create an Gate Operator account and begin using Ascent. (if equipped with limit switches) © 2020 Security Brands, Inc. All rights reserved. QSG-16M7-EN Rev. B (12/2020) -
Page 5: Event Input
5 of 6 Q U I C K S T A R T G U I D E 16-M7 Model Using a Third-Party Event Input Power Source (Optional) Wiring for accessories such as a request-to-exit device I M P O R TA N T Ascent Status and Event Terminals Verify your power source is compatible with GATE 1... - Page 6 Disconnect power to the Ascent unit before connecting Wiegand devices. Failure to disconnect power can damage the unit! Call (972) 474-6422 Email support@summitcontrol.com We are available Mon–Fri / 8am–5pm Central © 2020 Security Brands, Inc. All rights reserved. QSG-16M7-EN Rev. B (12/2020)
Need help?
Do you have a question about the Ascent M7 and is the answer not in the manual?
Questions and answers