Table of Contents
Advertisement
30 Progress
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display does not show
the time during the off status.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation set-
tle on the food and in the
cavity of the oven.
The display shows an error
code that is not in this table.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
Possible cause
The clock is not set.
The necessary settings are
not set.
The automatic switch-off is
activated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The display is deactivated.
The temperature is too low or
too high.
You left the dish in the oven
for too long.
There is an electrical fault.
The demo mode is activated.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
Remedy
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is the
cause of the malfunction. If
the fuse is blown again and
again, contact a qualified
electrician.
Replace the lamp.
Touch
and
at the
same time to activate the dis-
play again.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Refer to "Using the settings
menu" in "Additional func-
tions" chapter.
Advertisement
Table of Contents
