Clock Functions; Using The Accessories - Progress PHN23100X User Manual

2. Turn the knob slowly to the symbol
until you can hear a click. The two
cooking zones are on.

CLOCK FUNCTIONS

Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
You can use the functions
Duration
same time to set the time for
how long the appliance should
operate and when the appliance
should deactivate. This lets you
activate the appliance with a
delay in time. First set the
Duration
.
Setting the clock functions
For Duration and End
function and temperature of cooking. This is
not necessary for the Minute Minder
1. Press
again and again until the
indicator for the necessary clock
function starts to flash.
2. Press
or
necessary clock function.
The clock function operates. The display
shows the indicator for the clock function
you set.

USING THE ACCESSORIES

WARNING! Refer to Safety
chapters.
Application
To set, change or check the time of day.
To set countdown time. This function has no effect on the opera-
tion of the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
and End at the
and then the End
, set an oven
to set the time for the
3. To set the necessary heat setting refer
to "Heat settings".
For the Minute Minder function
the display shows the time left.
3. When the time ends the indicator of the
clock function flashes and an acoustic
signal sounds. Press a button to stop
the signal.
4. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
With the Duration
deactivates automatically.
Cancelling the clock functions
1. Press the
.
necessary function indicator flashes.
2. Press and hold
The clock function goes out after some
seconds.
Inserting the accessories
Wire shelf:
and End
functions, the appliance
again and again until the
.
Progress 9