Conceptronic CSM3PL Firmware Upgrade Instructions
Hide thumbs
Also See for CSM3PL:
- Quick installation manual (154 pages) ,
- Firmware upgrade instructions (7 pages)
Table of Contents
Advertisement
Quick Links
Conceptronic CSM3PL Firmware Upgrade Instructions
for Cyrillic firmware version OMP07ST011208A / 1.60
A. Suitable firmware versions
Note: This firmware upgrade for the CSM3PL is only suitable for devices with the following
firmware versions:
OMP07T052907A
OMP07ST081007A
B. Upgrade information
The Conceptronic CSM3PL is equipped with an upgradeable firmware chip. This function makes it
possible to improve the device and to add new features.
Note: The firmware upgrade procedure is at your own risk. Even though a firmware upgrade can
improve the device and add new features, there's also a possibility of an upgrade failure which
makes the device unusable. Conceptronic is not responsible for this and this voids the warranty.
Note: This firmware is only for customers who use subtitles that contain characters from the Cyrillic
alphabet. This firmware is not for countries that don't use the Cyrillic alphabet.
®
Copyright
2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Conceptronic CSM3PL
Summary of Contents for Conceptronic CSM3PL
- Page 1 Conceptronic CSM3PL Firmware Upgrade Instructions for Cyrillic firmware version OMP07ST011208A / 1.60 A. Suitable firmware versions Note: This firmware upgrade for the CSM3PL is only suitable for devices with the following firmware versions: OMP07T052907A OMP07ST081007A B. Upgrade information The Conceptronic CSM3PL is equipped with an upgradeable firmware chip. This function makes it possible to improve the device and to add new features.
- Page 2 C. WARNING !!! There are two different versions of the Conceptronic Media Player on the market. Both versions only differ in hard disk connection type (SATA vs. IDE) and the supplied remote control. Since the devices are so similar it is mandatory to pick out the right product when upgrading the firmware. The easiest way to identify your Media Player is through the remote control.
- Page 3 1.3 Copy the ‘FW’ folder including all its content to the hard disk of the CSM3PL. 1.4 Remove the CSM3PL from your computer with the ‘Safely remove hardware’ option. 1.5 Disconnect the USB cable of the CSM3PL and turn it off with the switch on the back side. 2. Updating the firmware 2.1 Connect the CSM3PL to a TV or monitor.
- Page 4 2.1 Make sure the CSM3PL is connected to a TV or monitor. 2.2 Turn on the CSM3PL with the remote control. 2.3 Connect the USB stick to the CSM3PL or slide the memory card in the right card slot of the CSM3PL.
- Page 5 3. Checking the firmware version 3.1 Make sure the CSM3PL is connected to a TV or monitor. 3.2 Select a folder by using the navigation buttons on the remote control. 3.3 Press the ‘FUNC’ button on the remote control, select ‘PROPERTIES’ and press the ‘Enter’...
- Page 6 - Firmware upgrade procedure changed. From now on a pop-up will show asking you if you want to upgrade or not. OMP07ST081007A: - Subtitles: “Latin2” character support for countries like Hungary, Bulgaria, etc. OMP07T052907A: - Initial release. ® Copyright 2007 by Conceptronic – All rights reserved www.conceptronic.net Page 6 of 6...
Need help?
Do you have a question about the CSM3PL and is the answer not in the manual?
Questions and answers