Kodak IMAGELINK 500 User Reference page 28

Error Code Number and Message
E139_ConfirmTone
Not_Mach_Enabled
E150_Buffer_Data
Transfer_To_Host
OM-12
Required Action(s)
Operator Action
Press the C (clear/cancel) key to clear the error
message (optional), then press the F key to input a
different function code. This error message is just a
warning to the operator; if the error message is cleared
by pressing the C (clear/cancel) key, normal scanning
can be performed. If the error message persists or if the
Confirmation Tone is required, contact the system
administrator.
System Administrator Action
Verify correct operation. If the error message persistsor
if the Confirmation Tone is required, call service.
Operator Action
Press the C (clear/cancel) key to clear the error
message (optional), then press the F key to again input
function code F02 Select Application Mode. If all the
images have not yet been read by the host, the error
message will be displayed again. If the F key is again
pressed and function code F02 Select Application
Mode is input and the error message is still displayed, it
is possible that the host is not reading the images from
the Image Buffer. If this is the case, the operator must
contact the system administrator. This error message is
just a warning to the operator; if the error message is
cleared by pressing the C (clear/cancel) key, normal
scanning can be performed. If the error message
persists, contact the system administrator.
System Administrator Action
If required, send the Read command from the host.
Verify correct operation. If the error message
persists, call service.
A-61409 April 1994