Table of Contents
Advertisement
Available languages
Available languages
APPLICATION
Intended Use
The machine is intended for driving in and loosening screws as well as for drilling
in wood, metal, ceramic and plastic.
Check the delivery parts
Carefully remove the machine from its packaging and check as the following parts
are complete:
-- Cordless drill / driver
-- Rechargeable battery pack
-- Battery charger
Should any part be missing or damaged, please contact our Customer service at
1-866-206-0888.
Product Features
The numbering of the product features refers to the illustration of the machine on the
graphics page (Pic.A，B，C，D)
1. Keyless chuck
2. Torque preselection ring
3. Soft grip
4. LED light
5. Rotational direction switch
6. On/Off switch
7. Battery unlocking button
8. Battery
9. Screwdriver bit
10.Charger
11.Green light
12.Red light
The accessories illustrated or described are not included as standard delivery.
TECHNICAL SPECIFICATIONS
Rated voltage
No-load speed
Max. torque screwdriving
application according to ISO 5393
Max. screw dia.
Max. drilling dia.
Chuck clamping range
Charge time
12V
0-500 RPM
15Nm
5/16'' (8 mm)
-Steel
1/4'' (6 mm)
3/8" (10 mm)
-Wood
13/32 - 3/8'' (1-10 mm)
1 hour
20
Advertisement
Table of Contents
