Omcan FR-CN-0150 Instruction Manual page 9

The compressor works normally,
but the temperature in the cabinet
lowers too slowly.
The noise is too loud
THE FOLLOWING ARE NOT FAULTS:
• When the freezer is working or after is stops for a while, the refrigerant in the pipes is cycling and gives out
"running water" sounds.
• The surface temperature of the compressor may be up 70°C~80°C when it is working.
• The back side of freezer gives out heat.
• In rainy season, the outer surface of the cabinet may have dew, which makes no defects on normal use.
Just dry it with a piece of cloth.
The door is opened too frequently.
The food in the cabinet is too
much, and placed improperly.
The frost film is too thick.
The surface of the condenser is
too dirty.
The door seals badly.
The freezer is placed unstably.
The fixing of the freezer is loose.
There's contact between pipes.
9
Troubleshooting
Reduce open times.
Place foods properly keep place
between them for ventilation of
cold air.
Take out foods and defrost.
Stop and clean the condenser.
Adjust the door seal.
Place it stably.
Tighten the fixing.
Separate them.