Power Cable - NEC DLP Cinema NC1700L User Manual

6-7. Power Cable

Ask your dealer for the power cable to select and purchase.
NOTE
Power Cable Electrical Specification
The projector is equipped with an IEC60320 C19 connector to connect an AC power supply cable. Ensure that the AC power cables
that connect the connectors built into the projector to the AC power maintains the current capacities as shown below.
Power supply voltage
AC 200–240V
Type of Power Cable
Use plugs, cables, and connectors that are suitable for the regulations of the country of installation, as shown in the following table.
For users in North America
NOTE
Use a power cable no longer than 4.5m/14.76 ft according to National Electrical Code.
Germany
Plug
CEE 7
USA
Plug
NEMA 6-15P
Projector input current
10.7A (MAX)
Plug
Cable
H05VV-F 3G1.5
Cable
SJT 3 x AWG 14
250V 16A or higher
Cable
Connector
Connector
IEC 320 C19
Connector
IEC 320 C19
6. Appendix
Power cable current capacity
75