6. Appendix
6-2-3. POWER button
Indicator condition
Off
Blinking light
Orange
Green
(cycles of 1)
(Note 1)
Green
(cycles of 2)
(Note 2)
Green
(cycle of 3
seconds)
(Note 3)
Steady light
Green
Orange
(Note 1) Repeats 0.5 seconds on → 0.5 seconds off.
(Note 2) Repeats 0.5 seconds on → 1.5 seconds off.
(Note 3) Repeats 2.5 seconds on → 0.5 seconds off.
6-2-4. DOUSER button
Indicator condition
Steady light
Green
Off
6-2-5. LIGHT ON/OFF button
Indicator condition
Off
Steady light
Green
Blinking light
Green
(cycles of 2)
(Note 1)
(Note 1) Repeat 0.5 seconds on → 1.5 seconds off.
64
Projector condition
The projector power supply is off.
While the projector software is starting
Preparing to turn power on/cooling fan rotating
(State from turning the power off to entering standby mode).
State where power cannot be turned off
(Immediately after turning the light on).
When the sleep timer is activated
The projector is turned on.
The projector is in standby.
Projector condition
The douser is closed.
The douser is opened.
Projector condition
The light is off.
The light is on.
State where the light cannot be turned on/off
(Immediately after turning the light on/off).
Note
-
Wait for a moment.
Wait for a moment.
Wait for a moment.
(for a maximum of about 90
seconds)
-
-
-
Note
-
-
Note
-
-
Wait for a moment.
(for a maximum of about 90
seconds)