NEC DLP Cinema NC1700L User Manual page 55

4-4-3. Reset
This is used to reset the light and air filter usage times.
Filter Cleaning
Resets the air filter usage time (for confirming the filter cleaning time).
[1] Press the ENTER button, the confirmation screen will appear.
[2] Select "Yes" in the confirmation screen, and then press the ENTER button to reset the filter usage time.
4-4-4. Installation
Lens Type
Sets the type of lens (supports or does not support the lens memory function) attached to the projector. This menu item is available
only when you are logged into the projector with Advanced User or higher privileges.
Without Sensor
With Sensor
Lens Calibrate
Performs calibration on lenses that support the lens memory function. Once you have attached a lens that supports the lens memory
function, always execute calibration. This menu item is available only when the projector power is turned on and you are logged into
the projector with Advanced User or higher privileges.
This items cannot be used if Lens Type is set to "Without Sensor".
NOTE
Lens Center
To move the lens shift to the center position. The center position may slightly shift depending upon mounting conditions of the lens.
This menu item is available only when the projector power is turned on and you are logged into the projector with Advanced User
or higher privileges.
← Press the ENTER button to display the confirmation screen.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Selected when using a lens unit that does not support the lens memory function (default value).
Selected when using a lens unit that supports the lens memory function.
← Press the ENTER button to execute calibration.
← Press the ENTER button to execute moving.
4. Using Menus
55