Using The Daisy Chain Function - Fujitsu P34-9 UE Operating Manual

Using the Daisy Chain function

With the daisy chain function, you can connect up to four monitors in sequence to a display port
output on your graphics card. The maximum possible number of monitors depends on the resolution:
Screen resolution
1920x1080 (FHD)
1920x1200 (WUXGA)
2560x1440 (QHD)
3440x1440 (UWQHD)
Ensure that your graphics card supports DP 1.2 or the USB-C port supports "Displayport
Alternate Mode" before activating the daisy chain function. Failing this, it is possible
that your graphics card may no longer recognise the monitor.
The maximum possible number of monitors can be limited by the graphics
card used or by the graphics card drivers used, as well as by their settings
(e.g. display refresh rate, colour depth).
► Connect up the graphics card to the "DP IN" port or to the USB-C port
(underside) on the first monitor.
► In each case, connect the next monitor to the "DP OUT" port.
Fujitsu
DP1.2
Maximum
4 monitors
2 monitors
Operation
39