Fujitsu P34-9 UE Operating Manual page 33

Function
Daisy Chain
FreeSync
Overdrive
DDC-CI
Status LED
Power Button
Factory recall
Fujitsu
Description
Daisy chain via display port and/or enable/disable USB-C.
Important Notice: When enabling / disabling this function, the power supply
via USB-C is interrupted briefly!
This function facilitates expansion of the desktop to a monitor connected via
"DP OUT". With USB-C this reduces the speed of data transmission from
USB 3.1 Gen1 (up to 5 Gbit/s) to USB 2.0 (up to 480 Mbit/s).
This option only appears if your model supports daisy chaining and
Displayport or USB-C is selected as the input signal.
Activating/deactivating AMD FreeSync
The AMD-FreeSync technology is an AMD project that relies on industry
standards such as Displayport Adaptive-Sync in order to provide end users
with a dynamic frame frequency. With the AMD-FreeSync technology,
the frame frequency of a display is synchronized with the frame rate of
FreeSync-compatible graphics cards. This reduces or eliminates visual
objects that many users find particularly annoying, i.e.: input latency, image
distortion and jerking during gaming and video sessions.
The AMD-FreeSync technology may be used via Displayport and HDMI
connections.
Enable/disable enhanced reaction time
This function can be used to improve the focus in fast moving images.
This setting can only be configured in Video or Custom application mode.
Enable/disable Display Data Channel - Command Interface
This function allows data to be exchanged via the connection between the
PC and the display.
Enable/disable Status LED
With this function, you can switch the status LED on the monitor on and off.
Setting the function of the On/Off switch
With this setting, you can decide whether to use the On/Off switch on the
monitor to switch the display or the connected computer on and off.
This option only appears if USB-C was selected as an input signal.
Activate the factory settings
With this function all settings are reset to the factory settings.
► Press the button to run the function.
► Press the button to confirm or the
The language selection menu appears.
With a VGA data cable, the message Auto Processing is displayed.
button to cancel.
Operation
29