Use Of Detergent And Rinse Aid; Multitab Function - Atag VA9111RT User Manual

Use of detergent and rinse aid

1 2
30
20
7
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Obey the instructions on the detergent
packaging.
How to fill the detergent dispenser:
1. Press the release button
7
lid of the detergent dispenser.
2. Put the detergent in the dispenser
3. If the washing programme has a prewash
phase, put a small quantity of detergent
on the inner part of the appliance door.
4. If you use the detergent tablets, put the
tablet in the detergent dispenser
5. Close the detergent dispenser. Press the
lid until it locks into position.

Multitab function

The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types of
tablets can contain other agents.
Do a check if these tablets are applicable for
the local water hardness. Refer to the in-
structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function deactivates the flow of
rinse aid and salt.
3 4
A
-
+
6
5
2
to open the
1
.
1
.
Use long washing programmes when
you use the detergent tablets. These
cannot fully dissolve with short washing
programmes and can decrease the
washing results.
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.
Do these steps to fill the rinse aid dispenser:
1. Press the release button
5
lid of the rinse aid dispenser.
2. Fill the rinse aid dispenser
aid. The mark 'max' shows the maximum
level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing programme.
4. Close the rinse aid dispenser. Press the
lid until it locks into position.
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
decrease the dosage.
The multitab function deactivates the indica-
tor lights of salt and rinse aid.
The programme duration can increase if you
use the multitab function.
Activate the multitab function before the
start of a washing programme.
You cannot activate the multitab func-
tion when the programme operates.
To activate the multitab function:
• Press the multitab button. The multitab in-
dicator light comes on.
29
6
to open the
3
with rinse
4
to increase or