Stick Welding Connections - Hobart Multi-Handler 200 Owner's Manual

5-8. Stick Welding Connections

3
OM-285922 Page 22
2
3
4
4
!
Turn off unit and disconnect
input power before making
connections.
!
Do not use worn, damaged,
undersized, or repaired
cables.
1 Negative (−) Weld Output
Terminal
2 Positive (+) Weld Output
Terminal
3 Stick Electrode Holder And
Cable
4 Work Clamp And Cable
Insert connectors fully into termi-
nals. Rotate connector clockwise to
lock in position.
Consult stick electrode manufac-
turer's guidelines for proper polarity
and best results.
Ensure all connections are tight.
1
Ref. 287758-A