Screen, Power-Up Mode; Screen, Wire Jog Mode - Hobart Multi-Handler 200 Owner's Manual

6-2. Screen, Power-Up Mode

6-3. Screen, Wire Jog Mode

.
A complete Parts List is available at www.HobartWelders.com
2
1
1 Power Switch
Push toggle to ON position.
2 Display
Three seconds into the power up
1
process, the screen will display the
input voltage (either 120V or 240V).
1 Display
Jog mode is displayed when feed-
ing wire through the MIG gun.
2 Wire Feed Knob
Jog speed can be adjusted using
the wire feed knob while in Jog
mode.
2
Ref. 287758-A
Ref. 287758-A
OM-285922 Page 31