Using Your Appliance - Hisense HWS54029SS Wine Cooler Use & Care Manual

Using your appliance

This section tells you how to use most of the useful features. We recommend that you read through them
carefully before using the appliance.
Installation The Handle
The tools you will need：
Philips Screwdriver
(Not provided)
The parts you will need：
Handle
(Provided)
Before using the device, install the handle as follows:
1.First open the door and take the door gasket out
on one side of the nonhinged side.
2.Find the handle and screws in the accessory
pack.
3.Attach the screw with a magnetic screwdriver so
that it passes through the screw hole in the door
body until the bottom. Keep a certain amount of
pressure and don' t let go.
4.One hand holds the handle so that the handle
hole is aligned with the screw, and the other hand
turns the screwdriver.
5.Install another screw in the same way.
Screw
(Provided)
Placement Of Bottles
The appliance is equipped with 6 shelves with 8 slots
each. The bottles should be placed on the shelves as
shown below.
You can also place bottles in the six slots which are
located at the bottom of the refrigerator.
WARNING
•To prevent the bottles from rolling down
and being broken, there should not be
more than 6 bottles placed at the bottom
of the refrigerate room as showed above.
•The maximum loading of each type of
shelf is 33lb.
Tips For Keeping The Wine
•Keep the wine in the dark .The door is in anti - UV
darkened double glass to protect the wine from
the light in case the refrigerator is located in
well - lit place.
•Lay the bottles down in such a way that the corks
do not dry.
•Avoid switching the appliance light on too often
or for too long. Wine keeps better in dark.
•To avoid agitating the wine, handle the bottles
with care.
•Follow the recommendations and advice at the
time of purchase or given in the technical
documentation regarding the quality, duration and
optimum storage temperature of the wine.
11