Axis V5925 User Manual page 22

AXIS V5925 PTZ Network Camera
Specifications
HDMI connector
TM
Use the HDMI connector to connect a display or public view monitor.
Network connector
RJ45 Ethernet connector.
Audio connector
3.5 mm connector
• Audio in – 3.5 mm input for a stereo microphone, or a line-in stereo signal.
• Audio out – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker
with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for audio out.
Audio input
1 Tip
Unbalanced microphone (with or without electret
power) or line
Digital signal
Audio output
1 Tip
Stereo unbalanced line, "left"
For audio in, the left channel is used from a stereo signal.
XLR connector
• Left – 3-pin XLR connector for balanced audio input. Use left connector for mono.
• Right – 3-pin XLR connector for balanced audio input.
1
Pin
Function Ground
2 Ring
Electret power if selected
Ring power if selected
2 Ring
Stereo unbalanced line, "right"
2
Balanced Microphone Hot (+) In
3
Balanced Microphone Cold (-) In
22
3 Sleeve
Ground
Ground
3 Sleeve
Ground