Application As Directed; Foreseeable Misuse - Lenze MCA 10I40 Series Mounting And Switch-On Instructions

Application as directed

The harmonized standards of the series IEC/EN60034 are used.
•
The product must only be actuated under the operating conditions and power limits
•
specified in this documentation.
The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
•
The product is not classed as a machine under 2006/42/EG: Machinery Directive.
•
No machine is to be commissioned or put into operation as intended in conjunction with
•
the product until it has been determined that the machine meets the regulations of EC
Directive 2006/42/EG: Machinery Directive; observe EN 60204−1.
Commissioning or putting into operation as intended is only permitted in compliance with
•
the EMC Directive 2014/30/EU.
The product is not a household appliance. Instead, it is a component that is intended
•
exclusively for further use in the context of commercial or professional use as defined by
EN 61000−3−2.
The product can be used according to the technical data if the drive systems have to
•
comply with categories in accordance with EN 61800−3.
Do not use the built-in brakes as fail-safe brakes. Disruptive factors that cannot be
•
influenced may cause the braking torque to be reduced.
The product is only to be operated together with an inverter.
•

Foreseeable misuse

Operate directly on the mains voltage
•
Use in potentially explosive atmospheres
•
Operate in aggressive environments (acids, gases, vapors, dusts, oils)
•
Operate under water
•
Operate under radiation
•
Operate in generator mode
•
Safety instructions
Application as directed
9