Page 1
DEUTSCH ESPAÑOL ENGLISH PORTUGUÊS FRANÇAIS NORSK NEDERLANDS SVENSK Hersteller Wörlein GmbH Tel.: +49 9103/71670 Gewerbestrasse 12 Fax.: +49 9103/716712 D 90556 Cadolzburg Email. service@woerlein.com GERMANY Web: www.woerlein.com NR515...
Page 6
24 25 CD Button Tuning/Enter Knob MENU Button INFO Button SCAN Button PRESET Button EQ Button Remote Sensor...
Page 7
75 ohm Antenna AC MAIN Power Button 40) SKIP + RECORD FUNCTION 41) PLAY.PAUSE / VOLUME - VOL- P .MODE VOL+ ENTER SKIP - PLAY/ SKIP- SKIP PAUSE ENTER 42) + 10 - 10 STOP 43) STOP INFO PRESET 44) SCAN INFO SCAN...
Page 8
To turn the system ‘on’, press the AC MAIN POWER button at the back side first, and then press the POWER button 1 second on the front panel. When you have finished your listening, press and hold the POWER button 3 seconds to turn off unit, or press the AC MAIN POWER button at the back side to turn off the unit directly.
Page 9
SKIP + SKIP - 1) Press the PLAY.MODE button on the unit or the P.MODE MENU button on the remote control, the player will repeat the current playing 00:00 track and will show on the screen. DISC F001 00:01 2) Press the PLAY.MODE button on the unit or the P.MODE MENU button on the remote control secondly, the player will 00:00 FOLDER...
Page 10
During FM playing mode, press RECORD one time, the ‘usb’ on the display will flash after 5 seconds and the recording is starting. During the playing mode, press the RECORD button one time, ‘REC-1’ will show on the display to confirm to choose record the playing track.
Turn on the system and set the volume to a low level. FUNCTION button to enter into FM mode. 2) Connect the FM antenna onto the 75ohm socket at the back of the unit, press the SCAN button to start auto-search the FM stations. Or rotate the 00:00 STEREO TUNING/ENTER control to tune the desired radio station.
Rotate TUNING/ENTER control or press SKIP+/- button on the remote control to choose the desired radio station programed. Repeat the above 1 - 2 steps to program 10 desired DAB stations or 10 FM stations. Press PRESET button one time to play the stored tracks. Rotate the TUNER/ENTER control or press SKIP/- button on the remote control to choose the desired stored tracks.
Page 13
Turn the system ON, press the FUNCTION button to enter into CD mode. Turn the system ‘ON’ and set the volume to a low level. Press FUNCTION button enter into the TAPE mode; Open End...
Page 18
IMPORTANT! To make sure the turntable can play the record with different standard completely, a hole with ‘NO OPEN’ pvc plate located at the back of the unit to adjust the screw inside the turntable. When the turntable stop early and auto- return, pls.
Need help?
Do you have a question about the NR515 and is the answer not in the manual?
Questions and answers