Delphi SkyFi SA10000 Quick Manual page 2

Changing Display Screens
To switch to a large-type display that
provides greater readability from
across a room
When viewing the main play screen,
press to switch to a larger
channel-number configuration.
Press again to continuously
scroll a large artist name/song title.
To see what artists or songs are
currently playing on multiple XM
channels
When channel or category lists
are displayed on the screen, push
to show names of artists
currently playing. Press again
to show titles of currently playing
songs.
Setting Presets
Up to 20 preset channels can be
stored in the two memory "banks"
of your SKYFi unit—10 in Preset A
and 10 in Preset B. Here's how:
Step 1: Tune in the channel you want
to register as a preset.
Step 2: Press until A or B appears
at the top of the display.
Step 3: Press and hold a number key
on the receiver or remote.
® The channel-name line will
reverse and audio will mute
for 2 seconds to indicate the
preset has registered.
Previewing Favorite Channels
To display artists and songs currently
playing on your favorite channels:
Step 1: Set your favorite channels as
presets.
Step 2: Select a memory "bank"
(Preset A or Preset B)
using .
Step 3: Press to switch between
display modes for channel
number, artist name, and
song title.
Step 4: Use the scroll wheel
the remote keys to
scroll through channels
stored in Preset A or Preset B.
Memory: Storing Artist/
Song Title Information
Press to store screen information
for a song. Press and hold
recall stored information. Up to 10
different artist names/song titles can
be saved at once.
Warning: When using this product it is
always important to keep your eyes on the
road and your hands on the wheel. Not doing
so could result in injury to you or to others or
in property damage.
or
Printed on Recycled Paper
©2003 Delphi Corporation. All rights reserved.
DPSS-03-E-XXX
to