TRENDnet User's Guide
time or the event. For example, if an alarm triggered recording ends
at 11:00, and the post‐record time is set as 5 seconds, the camera
records until 11:00:05.
The Post‐record time can be configured as 5s, 10s, 30s, 1 min, 2 min,
5 min or 10 min.
Stream Type: Select the stream type for recording.
Note: The record parameter configurations vary depending on the camera
model.
3. Select a Record Type. The record type can be Continuous, Motion
Detection, Alarm, Motion | Alarm, Motion & Alarm, and Event.
Continuous
If you select Continuous, the video will be recorded automatically
according to the time of the schedule.
Record Triggered by Motion Detection
If you select Motion Detection, the video will be recorded when the
motion is detected.
Besides configuring the recording schedule, you have to set the
motion detection area and check the checkbox of Trigger Channel in
the Linkage Method of Motion Detection Settings interface. For
detailed information.
© Copyright TRENDnet. All Rights Reserved.
Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is
triggered via the external alarm input channels.
Besides configuring the recording schedule, you have to set the
Alarm Type and check the checkbox of Trigger Channel in the
Linkage Method of Alarm Input Settings interface. Record Triggered
by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the
motion and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure
the settings on the Motion Detection and Alarm Input Settings
interfaces. Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the
external alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure
the settings on the Motion Detection and Alarm Input Settings
interfaces. Record Triggered by Events
If you select Event, the video will be recorded if any of the events is
triggered. Besides configuring the recording schedule, you have to
configure the event settings.
TV‐IP329PI
38