Table of Contents
Advertisement
TRENDnet User's Guide
3.
Enter the user name and password to access the server.
4.
Click Save to finish the settings.
Integration Protocol
If you need to access to the device through ONVIF protocol, you can configure
ONVIF user in this interface. Refer to ONVIF standard for detailed
configuration rules.
1.
Check the Enable ONVIF checkbox to enable the function.
2.
Add ONVIF users. Up to 32 users are allowed.
Set the user name and password, and confirm the password. You can set
the user as media user, operator, and administrator.
© Copyright TRENDnet. All Rights Reserved.
3.
Note: User settings of ONVIF are cleared when you restore the camera.
Video/Audio
Video
Note: ONVIF user account is different from the camera user account. You
have set ONVIF user account independently.
Save the settings.
TV‐IP329PI
24
Advertisement
Table of Contents
