TRENDnet User's Guide
Time Settings
1. Select the Time Zone of your location from the drop‐down menu.
2. Configure the NTP settings.
(1) Click to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions
with NTP server.
© Copyright TRENDnet. All Rights Reserved.
Note: If the camera is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44). If the camera is set in a
customized network, NTP software can be used to establish a NTP server for
time synchronization.
Configure the manual time synchronization.
Click Save to save the settings.
(3) (Optional) You can click the Test button to test the time
synchronization function via NTP server.
(1) Check the Manual Time Sync. to enable the manual time
synchronization function.
(2) Click the icon
to select the date, time from the pop‐up calendar.
(3) (Optional) You can check Sync. with computer time item to
synchronize the time of the device with that of the local PC.
TV‐IP329PI
11