Siemens SIMATIC NET RUGGEDCOM RS416 Installation Manual page 12

1
2
3
4
5
6
7
8
Figure 1.1
Communication Ports
Port Status Indicator LEDs
Display Mode Indicator LEDs
Mode button
Alarm Indicator LED
RUGGEDCOM RS416
Installation Manual, 04/2021, C79000-G8976-1018-10
1
Serial Ports
Fiber Optic Ethernet and/or BNC (Optional) Ports
Port Status Indicator LEDs
Display Mode Indicator LEDs
Mode Button
Alarm Indicator LED
Power Module Indicator LEDs
RS-232 Serial Console Port (RJ45)
RUGGEDCOM RS416
Ports for communicating with other devices or accessing the
RUGGEDCOM RUGGEDCOM RS416 operating system are described
in "Communication Ports (Page
Port status indicator LEDs indicate the operational status of each
port, dependent on the currently selected mode.
Mode Color/State
Status Green (Solid)
Green
(Blinking)
Off
Duplex Green (Solid)
Orange
(Blinking)
Off
Speed Green (Solid)
Green
(Blinking)
Orange (Solid)
Off
The display mode indicator LEDs indicate the current display mode
for the port status indicator LEDs (i.e. Status, Duplex or Speed).
The Mode button sets the display mode for the port status indicator
LEDs (i.e. Status, Duplex or Speed). It can also be used to reset the
device if held for 5 seconds.
The alarm indicator LED illuminates when an alarm condition exists.
Introduction
1.2 Description
2 4
3 5 8
23)".
Description
Ethernet Ports Serial Ports
Link detected —
Link activity Traffic
detected
No link No traffic
detected
Full duplex mode
Half duplex mode
No link detected
100 Mb/s >19200 to
<57600 bps
— 57600 bps or
higher
10 Mb/s <19200 bps
No link detected
6
7
3