Technical Summary; Brief Description; Overview; Applications - Optical Systems Design OSD2167M Series Operator's Manual

1 TECHNICAL SUMMARY

1.1

BRIEF DESCRIPTION

1.1.1

OVERVIEW

The OSD2167M is designed to convert between 10/100/1000Base-T copper cabling and 1000Base-Sx
fiber cabling. It has one PoE RJ45 copper port which provides up to 15.4W and one optical port for
operation over two fibers. Jumbo frames are also supported by the OSD2167M.
The unit operates on 850nm wavelength over multimode fiber. Operation over at least 550m of OM or
OM3 multimode fiber limited by the fiber bandwidth.
A major benefit of the OSD2167M is its reliable operation over the -10°C to +55°C temperature range
which allows it to be used in all commercial and many industrial environments.
1.1.2

APPLICATIONS

Any network utilising a mix of copper
▲
and fiber
Secure, noise immune extensions of
▲
gigabit Ethernet backbone networks
1.1.3

FEATURES AND BENEFITS

Complies with
▲
IEEE802.3i/802.3u/802.3ab
10/100/1000Base-T, IEEE802.3z
1000Base-Sx standards.
Supports network traffic of up to
▲
1000Mbps.
Has one fixed 10/100/1000BaseT
▲
copper port and one fixed
1000BaseSx optical port
Automatic MDIX: no need for
▲
crossover cables.
Complies with the IEEE802.3az
▲
Energy-Efficient Ethernet standard
PAGE 4
OSD2167M OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
Commercial IP communications
▲
Networks with PoE devices such as
▲
VOIP phones, access controls, etc
Provides up to 15.4W PoE
▲
Complies with the IEEE802.3af
▲
▲ Supports jumbo frames of up to 10KB
Multimode fiber operation
▲
Available for operation over 2 fibers
▲
▲ Powered by a 46 to 56V
supply
Operates over the temperature range
▲
of -10 to +55°C
DOC ID: 10114402
power
DC