1 TECHNICAL SUMMARY
1.1
BRIEF DESCRIPTION
1.1.1
OVERVIEW
The OSD2166M is designed to convert between 10/100/1000Base-T copper cabling and 1000Base-Sx
fiber cabling. It has one RJ45 copper port and one optical port for operation over two fibers. Jumbo
frames are also supported by the OSD2166M.
The unit operates over multimode or singlemode fiber. Operation over at least 550m on OM2 or OM3
multimode fiber limited by the fiber bandwidth, or at least 30km over singlemode fiber.
A major benefit of the OSD2166M is its reliable operation over the -10°C to +55°C (Optionally -20°C
to +75°C) temperature range which allows it to be used in all commercial and many industrial
environments.
1.1.2
APPLICATIONS
Any network utilising a mix of copper
▲
and fiber
Secure, noise immune extensions of
▲
gigabit Ethernet backbone networks
1.1.3
FEATURES AND BENEFITS
Complies with
▲
IEEE802.3i/802.3u/802.3ab
10/100/1000Base-T, IEEE802.3z
1000Base-Sx standards.
Supports network traffic of up to
▲
1000Mbps.
Has one fixed 10/100/1000BaseT
▲
copper port and one fixed
1000BaseSx optical port
Automatic MDIX: no need for
▲
crossover cables.
Complies with the IEEE802.3az
▲
Energy-Efficient Ethernet standard
PAGE 4
OSD2166M OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
Commercial IP communications
▲
▲
Supports jumbo frames of up to 10KB
Multimode fiber operation
▲
Available for operation over 2 fibers,
▲
1-fiber operation is optional.
▲
Powered by a non-critical 12V
power supply
Operates over the temperature range
▲
of -10 to +55°C
Optionally available to operate over
▲
the temperature range -20 to +75°C
DOC ID: 10114502
DC