Table of Contents
Advertisement
Front cover
HART communication
sockets
VEGATRENN 152 •
6
Setup
6.1
Adjustment system
1
2
3
Fig. 1: Display and adjustment elements
1
HART communication sockets, channel 1
1
HART communication sockets, channel 2
3
Hinged front cover
6.2
Adjustment elements
The adjustment elements are located under a hinged front cover. To
open it, use a small screwdriver in conjunction with the slot on the
upper side of the front cover. To close it, push the cover at bottom and
top firmly onto the front cover until you hear the two retaining clips
snap in.
No adjustment or configuration of VEGATRENN 152 is necessary.
Via the HART communication sockets, parameter adjustment of the
connected HART sensors can be carried out without interrupting the
measuring circuit. The resistor (230 Ω) required for this purpose is
already integrated in VEGATRENN 152 when connecting the termi-
6 Setup
13
Advertisement
Table of Contents
