HP 245 G8 Maintenance And Service Manual page 58

a. The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (1). While
turning the tweezers, wrap the tape around the tweezers (2) as you continue to pull the tape out
from behind the display panel (3). Rotate the display panel over and place it next to the display
enclosure (4).
TIP:
b. Rotate the display panel onto the keyboard (1) to gain access to the display cable connection on
the back of the panel.
c. On the back of the display panel, release the adhesive strip that secures the display panel cable to
the display panel, and then disconnect the cable (2).
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
You must pull the tape several times to remove it.