Drives
Figure 4-4 shows an example of drive hardware that can be installed in the com-
puter. Refer to this figure when you perform any of the procedures in the
following subsections.
DC power cable
diskette/tape drive
interface cable
diskette drive interface
connector (FLOPPY)
SCSI connector
(SCSI2 CD-ROM)
SCSI connector
(BACKPLANE SCSI1)
Figure 4-4. Drive Hardware
3.5-inch diskette drive
system board
SCSI2 CD-ROM
drive
SCSI hard-disk
drive bay (6)
SCSI backplane
board
SCSI interface
cable
Removing and Replacing Parts
4-5