Replacement Of Ui-24 Board - Sony CLX101ASA Service Manual

4-7. Replacement of UI-24 Board

1. Remove the rear cover assembly. (Refer to Section 4-5.)
2. Disconnect the harness from the connector (CN100) on the UI-24 board.
UI-24 board CN100
Harness
3. Remove the two screws, then remove the UI bracket.
4. Remove the UI-24 board from the UI bracket.
PSW3 8
UI bracket
UI-24 board
5. To install, reverse the removal procedure.
4-12 (E)
CLX101ASA