Minibar Systems
SmartFridge 65 Solid Door – Electronics on Door
6. Maintenance and Cleaning
Disconnect the SmartFridge from the power supply before cleaning or attempting repairs.
6.1 Cleaning the SmartFridge
Disconnect the power plug from outlet before cleaning the SmartFridge. Remove the contents.
Use neutral cleaning agents to avoid damage to the SmartFridge liner and exterior surface.
Clean the exterior with water and a neutral detergent.
Remove the detachable accessories in the interior of the SmartFridge and clean with water and a neutral
liquid detergent. Plastic parts cannot be washed in dishwashers.
Wash the interior of the SmartFridge with lukewarm water adding one or two tablespoons of vinegar.
After cleaning, reconnect the SmartFridge to the power supply. SmartFridge is now ready for use.
6.2 Automatic Defrosting of the SmartFridge
There is no need to defrost the SmartFridge because ice depositing on the inner back wall is defrosted
automatically. Ice build-up on the inner back wall during the compressor operation (when the compressor has
cycled off) will defrost automatically. Defrost water collects inside the drain by passing through the drain
outlet in the inner back wall into a drain pan situated above the compressor, from where it evaporates.
6.3 Switch off the SmartFridge When Not in Use
If you do not intend to use the SmartFridge for long periods of time:
Disconnect the power supply
Take out the food and defrost
Clean the SmartFridge
Leave the door slightly open
DOC0118_SmartFridge 65 Solid Door - Electronics on Door_Rev-5.doc
Page 7
Need help?
Do you have a question about the SmartFridge 65 and is the answer not in the manual?