Dell PowerVault 132T Upgrade Manual page 5

Updating the Tape Library Firmware
You can update the firmware using one of the following methods:
• Using a Web browser
• Using a serial connection
You must download the latest firmware package from the Dell Support website at
support.dell.com. After you download the package, the firmware file will be located at
c:\dell\drivers\rxxxxx\LTO-2 Library, where rxxxxx is the release number of the
downloaded firmware package.
Updating Firmware Using a Web Browser
Open a Web browser on the system that contains the downloaded firmware file and go
1
to the IP address of the remote management unit that is installed in the library for
which you want to update the firmware.
On the main page, click Firmware.
2
Enter the administrator user name and password for the library.
3
The default user name is admin and the default password is password.
Click Update Library Firmware in the Select target for update box that appears.
4
Click Browse and locate the firmware file that you downloaded.
5
NOTE: The downloaded firmware file is located at c:\dell\drivers\rxxxxx\LTO-2 Library,
where rxxxxx is the release number of the downloaded firmware package.
Click Update Firmware to start the update.
6
Reboot the library after the update completes.
7
Verify that the library is online.
8
The LCD Main menu displays Dell 132T when the library is online.
Verify the firmware level on the main Web page of the remote management unit. The
9
firmware version is displayed in the Library Firmware field.
Upgrading Tape Drive Modules
5