Using The On-Screen Display; Main Menu; Input Select - Dell M409WX User Manual

19 Auto adjust
20 Keystone adjustment Press to adjust image distortion caused by tilting

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
In the Main menu, press
button on the control panel or the remote control to select a submenu.
In the submenu, press
the color changes to dark gray. Use
control to make adjustments to a setting.
To go back to Main menu, go to Back tab and press the Enter button
control panel or the remote control.
To exit the OSD, go to Exit tab and press Enter button
on the control panel or the remote control.

Main Menu

Input Select

VGA—Press Enter to detect VGA signal.
S-V —Press Enter to detect S-Video signal.
IDEO
Press to synchronize the projector with the input
source. Auto adjust does not operate if the OSD
is displayed.
the projector. (+40/-35 degrees)
to navigate through the tabs. Press the Enter
or
or to make a selection. When an item is selected,
or
A S
UTO
automatically detect the available input
signals. When On is selected and you press
Source on the control panel/remote, it
automatically finds the next available input
signal.
Select Off to lock the current input signal or
to manually select the input signal you want
to use. When Off is selected and you press
Source , you select which input signal you
want.
on the control panel or the remote
or press Menu button
—Select On (Default) to
OURCE
Using Your Projector
on the
21