Dell M409WX User Manual page 28

screen replaces all the original screens with the Dell logo. You can recover the
default screen by selecting Dell Logo on the pop-up screen.
NOTE:
To capture a full image, ensure the input signal that is connected to
projector is 1280x800 resolution.
M L —Select On to enable Menu Lock and hide the OSD menu. Select Off
ENU OCK
to disable the Menu Lock.
NOTE:
You can also disable Menu Lock by pressing the Menu button on the
control pane or remote control for 15 seconds.
M T —Allows you to adjust the time delay of the OSD Timeout. The
ENU IMEOUT
default setting is 30 seconds.
M P —Allows you to select the location of the OSD on the screen.
ENU OSITION
M T
ENU RANSPARENCY
background.
P —Allows you to password protect the projector. This security utility
ASSWORD
enables you to impose a variety of access restrictions to protect your privacy and
stop others from tampering with your projector. This means that the projector
cannot be used if it is taken without authorization, and thus serves as a theft-
prevention feature.
Select On to enable password protection. A Please Key In the Password screen
appears requesting you to enter a password when the projector is powered on the
next time. Select Off to disable password protection.
NOTE:
Password protection is disabled by default.
If you enable this feature, you will be asked to enter the projector's password
after you turn on the projector:
1
1st time password input request:
a Go to Others menu, press Enter and then select Password to Enable the
password setting
28 Using Your Projector
—Allows you to select the transparency level of the OSD
.