Dell 2400MP Owner's Manual page 20

3
Keystone adjustment
4 Resync
5 Menu
6
TEMP warning light
7 LAMP warning light
8 Enter
9
Keystone adjustment
10 Up
and
11
and buttons
20 Using Your Projector
Press to adjust image distortion caused by tilting
the projector. (±40 degrees)
Press to synchronize the projector to the input
source. Resync does not operate if the on-screen
display (OSD) is displayed.
Press to activate the OSD. Use the directional
keys and Menu button to navigate through the
OSD.
• A solid orange TEMP light indicates that the
projector has overheated. The display
automatically shuts down. Turn the display on
again after the projector cools down. If the
problem persists, contact Dell.
• A blinking orange TEMP light indicates that a
projector fan has failed and the projector
automatically shuts down. If the problem
persists, contact Dell.
If the LAMP light is solid orange, replace the
lamp. If the LAMP light is blinking orange, the
system has failed and the projector will
automatically shut down. If this problem persists,
contact Dell.
Press to confirm the selection item.
Press to adjust image distortion caused by tilting
the projector. (±40 degrees)
Down Press to select the OSD items.
Press to adjust the OSD setting.