Inner Roll Stop And Bridge Plate - Braun NCL Century 2 Series Operator's Manual

Lift Features (continued)
Inner Roll Stop: NCL-2 Series
lift models are equipped with an
automatic inner roll stop that also
serves as a bridge plate (inner
roll stop photos below).
Page 18
Operation Notes and Details
When the UNFOLD switch is
pressed and the platform unfolds
from stow position to floor level,
this mechanical roll stop is auto-
matically unfolded to the bridging
(horizontal) position to provide a
bridge plate between the platform
and the lift base plate (vehicle
Fully Deployed Fully Unfolded
(vertical)
Inner Inner Roll Stop
Roll Stop (bridging position)
Inner Roll Stop
The inner roll stop must
overlap the threshold (base)
plate a minimum 1/2".
floor). The inboard edge of the
roll stop rests on the threshold
warning plate (base plate). The
roll stop automatically deploys
(rotates) to the vertical (roll stop)
position as the platform lowers
to the ground (DOWN switch is
pressed).
(horizontal)