Table of Contents
Advertisement
the platform from unfolding
from the stowed position in the
event of platform drift. Due to
the "all-hydraulic" operation
of the dual-cylinder NCL-2,
hydraulic fluid expansion, con-
traction or seepage may occur.
Any of these conditions may
result in platform drift (failure to
hold the platform in the folded
or raised position). Platform
drift may occur during lift ship-
ment and/or between extended
periods of non-lift use.
In the event that the platform
does not unfold when the
UNFOLD switch is pressed,
press the FOLD switch mo-
mentarily to disengage the
Lift-Tite
™
latches (platform drift
has occurred). Then, press the
UNFOLD switch to unfold the
Operation Notes and Details
platform to floor level (standard
operation).
When manually operating a lift
equipped with Lift-Tite
insert the pump handle in the
pump and stroke until the plat-
form folds fully (stops). Then,
open the hand pump valve (turn
counterclockwise) to unfold the
platform. Folding the platform fully
first will ensure that the Lift-Tite
™
latches,
latches will disengage properly
when the release valve is opened.
Manual Operating Instructions are
provided on pages 33-35.
Disengaged
Lift-Tite
™
Latch
Latch
Engagement
Pin (Roller)
™
Page 17
Advertisement
Table of Contents
